From ambrose@fnal.gov Thu Nov  8 09:12:41 2001
Date: Thu, 08 Nov 2001 09:11:49 -0600
From: David Ambrose <ambrose@fnal.gov>
To: COT Group -- Adam <agibson@fnal.gov>, Alec <alwilli4@sas.upenn.edu>,
     Aseet <mukherjee@fnal.gov>, Ashutosh Kotwal <kotwal@phy.duke.edu>,
     Ayana <holloway@physics.harvard.edu>, Bill Orejudos <orejudos@fnal.gov>,
     Bill Robertson <Robertson@fnal.gov>, Bob Wagner <wagner@fnal.gov>,
     Dave Ambrose <ambrose@fnal.gov>, Eiko <eikoyu@fnal.gov>,
     Eric James <james@umaxp1.physics.lsa.umich.edu>,
     Evelyn <thomsone@fnal.gov>, Greg Veramendi <mendi@cdfsga.fnal.gov>,
     Jay <dittmann@fnal.gov>, JC Yun <yun@fnal.gov>,
     Ken Schultz <kschultz@fnal.gov>, Kevin Burkett <Burkett@fnal.gov>,
     Kevin Pitts <kpitts@fnal.gov>, Kirby <kirby@fnal.gov>,
     Marina Brozovic <brozovic@fnal.gov>,
     Michael Lindgren <mlindgre@cdfsga.fnal.gov>, Morris <Binkley@fnal.gov>,
     Nigel Lockyer <lockyer@fnal.gov>, Paris <Parisp@sas.upenn.edu>,
     Peter Tamburello <tamburello@fnal.gov>,
     Peter Wittich <wittich@higgs.hep.upenn.edu>, pjw <pjw@fnal.gov>,
     Reinhard Eckmann <eckmann@fnal.gov>, Rob Snihur <snihur@fnal.gov>,
     Robyn Madrak <madrak@fnal.gov>, Ron Moore <ronmoore@umich.edu>,
     Ting <tmiao@fnal.gov>, Tom Phillips <phillips@phy.duke.edu>,
     Young-Kee <ykkim@fnal.gov>
Subject: owl report


Starting to button up detector from October shutdown.  Peter and I looked at
the following...


Crate 4 is having problems activating in run control, so is left out (will
try a new TRACER):

   --> Swapped TRACER #103 from cleanroom with crate #4 TRACER #152, but
       still doesn't get DONE LED to come on.

   --> I talked with Fred about this and he will take a look.


Mainly have some plug in problems here:

   SL4-226 (D,579,18-17-3): 12 dead, 00 hot!, 00 warm, 00 null
   SL4-227 (D,579,18-17-3): 09 dead, 03 hot!, 00 warm, 00 null --> 2 HVD  1 TRK

      --> Needs a CV jumper to ASDQ.

   SL5-004 (A,018,10-12-2): 00 dead, 12 hot!, 00 warm, 00 null
   SL5-005 (A,018,10-12-2): 00 dead, 11 hot!, 01 warm, 00 null

      --> Has developed noise during shutdown.  Haven't looked yet.

   SL7-056 (A,092,01-02-0): 03 dead, 09 hot!, 00 warm, 00 null
   SL7-057 (A,092,01-02-0): 03 dead, 09 hot!, 00 warm, 00 null

      --> Fixed bad u-socket plug-in.

   SL8-235 (B,367,15-14-3): 12 dead, 00 hot!, 00 warm, 00 null

      --> Fixed bad TDC plug-in.


Still to do from last night:

   SL5-220 (C,518,17-13-2): 00 dead, 02 hot!, 09 warm, 00 null
   SL5-221 (C,518,17-13-2): 00 dead, 00 hot!, 03 warm, 07 null
   SL5-223 (C,519,17-13-3): 00 dead, 02 hot!, 03 warm, 00 null

      --> Thought this was double-calib, but just has smaller pos calib.
          Swapped 5-220 with 5-222, but still have NULL noise and higher
          DTH with 5-220, so HAS BEEN SWAPPED BACK.

   SL8-232 (B,366,15-14-2): Q = 32.6 (23.9+/-2.1) +8.7
   SL8-233 (B,366,15-14-2): Q = 31.5 (23.9+/-2.1) +7.6

      --> Got new ribbon, so is probably CV socket.  Try to
          wiggle back connection to QEN (is presently floating).
      --> Wiggled until QEN came back, but not likely to hold.


Analog monitor work (from Ayana):

   --> Plugged in/repaired connections for 7 channels on the West,
       and 3 on East (out of 96 on East + West).

   --> Only 4 known bad channels on East, no bad channels on West.